[aprssig] Digipeater Symbol Overlays

[Kenneth Finnegan]

I agree with Frank. I would recommend I#.

The confusion is pretty valid; the symbol selection section in the Aprx
manual is grossly inadequate; I'll now be updating it once the dust settles
here.

--
Kenneth Finnegan
http://blog.thelifeofkenneth.com/

On Wed, Oct 19, 2016 at 9:25 AM, Frank Knobbe <k4fhk at knobbe.us> wrote:

> On Wed, 2016-10-19 at 11:39 -0400, David Andrzejewski wrote:
> > My station NEWBRY is both a high-profile digipeater and a two-way
> > igate.
> >
> > [...]
> > It seems like perhaps I# would be better, because although that
> > doesn't indicate that it's a two-way igate, it does indicate that it
> > is both a digipeater and igate, which T& does not.
>
>
> I consider a high-digi that Igates to be primarily a digipeater that
> also Igates. So, I# (digi with I overlay) would be the better choice in
> my opinion.
>
> -Frank
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20161019/230250c1/attachment.html>