[aprssig] Two meter radio

Rich Osman lists at n1oz.net
Fri Sep 5 16:24:35 EDT 2014

Or this....


They are about $20 a piece, built around the new RDA
one-chip-transceiver chip (with CTCSS,DCS etc.) and deliver about 1W or
RF. Both V and U

there are versions on eBay from a few different vendors but they all
look the same.


The downside is that you need to package and power it, but it'll
probably fit in the TNC.

Rich, N1OZ

On 9/5/2014 2:24 PM, Randy Love wrote:
> The Yaesu Ft-2600 has a DB-9 on the rear with very similar pinout to
> the DR-135.
> The commercial version of the same style by Vertex-Standard also do,
> but require some internal jumps be soldered to enable pin assignments.
> Randy
> WF5X
> On Sat, Aug 30, 2014 at 1:55 PM, Bob Burns W9BU
> <w9bu_lists at rlburns.net <mailto:w9bu_lists at rlburns.net>> wrote:
>     On 8/28/2014 7:25 PM, Bill Vodall wrote:
>         Has anybody discovered a good 2 meter data radio?
>     If you are looking for a 2m radio that has easy access to RX
>     audio, TX audio, and PTT, the Alinco DR-135 brings all those
>     signals out to a DB-9 connector on the back of the radio.
>     If the optional TNC is installed, those signals are interrupted
>     and the DB-9 becomes an RS-232 port to the internal TNC. But, if
>     the TNC is not installed, the signals you need for an external TNC
>     are right there for the taking.
>     Bob...
>     _______________________________________________
>     aprssig mailing list
>     aprssig at tapr.org <mailto:aprssig at tapr.org>
>     http://www.tapr.org/mailman/listinfo/aprssig
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig

mailto:lists at n1oz.net     http://www.n1oz.net       ARS: N1OZ
Rich Osman;  POB 93167; Southlake, TX 76092 (Near DFW Airport) 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20140905/acddf10a/attachment.html>

More information about the aprssig mailing list