[aprssig] IGate issue

[Andrew P.]

Did you change your passcode? You changed your callsign, so you will need a new APRS-IS passcode corresponding to the new callsign.

Contact the author of the software you are using for a new passcode if you don't have one already.

Andrew Pavlin, KA2DDO
author of YAAC
http://www.ka2ddo.org/ka2ddo/YAAC.html

From: Bruce.Boardman at team.telstra.com
To: aprssig at tapr.org
Date: Tue, 18 Mar 2014 12:45:46 +1100
Subject: [aprssig] IGate issue

Hi,I recently changed address (to a different state in Australia) and this necessitated a callsign change. My Igate is now VK4MQ-5 (used to be VK2ZZM-5). http://aprs.fi/info/a/VK4MQ-5 Since the change I am passing packets RF to internet OK, but I don't have a "stations heard by" list any more. Also my graphs show nothing. I tried firing up my mobile tracker on 10MHz so that only my Igate could hear it, and the packets pass OK but still no list. Other mobile stations are passing info to me which I can see from their raw packets. Looks like an APRS server problem to me, as I have confirmed all my UI View settings?? Any advice please?  Regards, Bruce Boardman 

 
_______________________________________________
aprssig mailing list
aprssig at tapr.org
http://www.tapr.org/mailman/listinfo/aprssig 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20140317/a8f71b2b/attachment.html>