[aprssig] APRS-IS vs. FireNet
kg4pid at yahoo.com
Wed Jun 25 12:23:06 EDT 2014
Lynn, I'll try to answer your questions below.
What server and port were you using on the APRS-IS? Some ports provide pre-set filters for clients.
texas.aprs2.net mostly, using port 14580
What specific stations are you not getting from FireNet? Exact
callsign-SSIDs that you're no longer seeing.
It's the recently heard list so it varies. Like when a mobile station is heard and then gets out of range, but is heard by another igate the APRS-IS will send you that stations packets for a short period of time. (One hour I think)
Your filter doesn't include any range or area specifications. Are
you sure that's the exact filter you were using before?
Same filter, this is a standalone igate so I don't need anything extra except NWS watches, warnings and advisories .
If you switch back to the APRS-IS connection, do the stations start
coming in again?
If APRX has no display, how do you do know that the packets are not
coming in? Are you viewing them with another APRS client, or what?
APRX runs under Unix/Linux and has a detailed log. It's easy to see when the APRS-IS sends something. I connect to it using SSH with Putty. I have had it running on a Raspberry Pi for over a year now.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the aprssig