[aprssig] Anybody Missing a D710?

[Chuck Gooden]

Will it even work without the head?  I thought the THD700 had to have 
both the base and the head to function.  I assume the D710 would be the 
same.

Really nice soldering job on the fuse though.


On 9/20/2013 5:33 PM, Lee Mushel wrote:
> I put in a bid so that I could ask the seller a question.   This was 
> done but he has not responded so far (ten hours)  and eBay still 
> hasn't indicated that anyone has asked a question!   I think you are 
> right about the smell!
>
> Lee   K9WRU
> ----- Original Message ----- From: "Keith VE7GDH" <ve7gdh at rac.ca>
> To: "TAPR APRS Mailing List" <aprssig at tapr.org>
> Sent: Friday, September 20, 2013 9:42 AM
> Subject: Re: [aprssig] Anybody Missing a D710?
>
>
>> Bob WB4APR wrote…
>>
>>> Unfortunately, the APRS callsign is in the control head, not the 
>>> radio so it is not traceable that way…
>>
>> Hopefully a licensed amateur radio operator will purchase it and get 
>> the serial number to the authorities and major dealers and see if it 
>> has been reported stolen. I could think of a few reasons why the body 
>> could end up for sale, but do agree that it sounds fishy.
>>
>> 73 Keith VE7GDH
>> _______________________________________________
>> aprssig mailing list
>> aprssig at tapr.org
>> http://www.tapr.org/mailman/listinfo/aprssig
>>
>>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig