[aprssig] GM300 packet interface
Scott Miller
scott at opentrac.org
Fri May 3 13:59:11 EDT 2013
I'd have to check what the definitions are for the mini-DIN standard,
but in any case the GM300 only has the single audio output so it's wired
to both of those.
Scott
N1VG
On 5/3/2013 10:54 AM, Ron Stordahl, AE5E wrote:
> Chances are this will also work with the Motorola M120, SM50 and SM120.
>
> Scott..on your web page you list rx aduio as 4/5. Is 4 9600 and 5 1200
> or visa versa?
>
> Ron, AE5E
>
> ------------------------------------------------------------------------
> *From:* Scott Miller <scott at opentrac.org>
> *To:* TAPR APRS Mailing List <aprssig at tapr.org>
> *Sent:* Thursday, May 2, 2013 1:33 PM
> *Subject:* [aprssig] GM300 packet interface
>
> Hi all,
>
> We just added a new gadget that might be of interest to some of you.
> It's an adapter board that converts the Motorola GM300's accessory port
> to a 6-pin Mini-DIN packet connector:
>
> https://www.argentdata.com/catalog/product_info.php?products_id=169
>
> If we hadn't just run out of mini-DIN pigtails we'd now have a solution
> for interfacing the ADS-SR1 simplex repeater, too, but that will
> have to
> wait until we get the next batch of cables.
>
> 73,
>
> Scott
> N1VG
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org <mailto:aprssig at tapr.org>
> http://www.tapr.org/mailman/listinfo/aprssig
>
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> http://www.tapr.org/mailman/listinfo/aprssig
>
More information about the aprssig
mailing list