[aprssig] RFC New Data Type Identifier?

[PE1RDW]

On Sat, 26 Jan 2013 16:41:54 +0100, Bryan Hoyer <bhhoyer at gmail.com> wrote:

> As many of you know we are building a new digital radio that can be  
> controlled OTA.
>
> If I define a command as anything that causes an action on the  
> receiver's part. I do not see a DTI for commands, except for the  
> following:
>
> ? Query
>
> < Station Capabilities
>
> Both of these elicit a response but are not generic command types.
>
> We need a single generic DTI for control of the radio, that flows  
> harmlessly thru the system and yet is understandable by a passive  
> observer.
>
> Should we use an existing type like:
>
> { User-Defined APRS packet format
>
> or is some other solution more appropriate?
>
> Inquiring minds want to know...
> Bryan K7UDR
>
>
digined does it by embedding the commands in a message, messages will  
always go trough the system including from IS to RF, a lot of other aprs  
commandable systems use messages as wel so I see no reason what it would  
nto work for your project as wel.

-- 
73 Andre PE1RDW