[aprssig] Track Garmin Rinos in field, display data on Windows Laptop, hopefully merge with APRS

Byon Garrabrant byon at byonics.com
Fri Jan 27 00:15:58 EST 2012


I've actually done a fair bit of research on the Rino over the air
protocol in the past, and have it mostly parsed, so was planning to
eventually release a special firmware for the TinyTrak4 which would
listen to Rino audio from any radio/scanner, and output APRS format
serial strings to be plotted via any APRS application.  I wasn't sure
if there was an interest in this, but perhaps there is, and I should
bump that project's priority.

Byon

On Thu, Jan 26, 2012 at 4:50 PM, Steve Noskowicz <noskosteve at yahoo.com> wrote:
>
>
>   Hmmm.  Thoughts.
> Seems like a digi that can do Rhino -->  APRS objects would put them on the local APRS net and provide all the features of APRS for both the Rhinos and APRS - and, I think be ok for special ops rather than full time.  This would be third party traffic, no?; and the Digi op would be in 'control'.  If done on the regional APRS freq, then it is also on the net.  I'd have to think about going APRS --> Rhino; that's an even more sticky legal wicket.  I do not know the capabilities of gpsman or xastir.
>   If xastir also does digi can understand Rhino, it would "easily" be able to output them in APRS, no...?
>
> Although an APRS client with Rhino input would what is being asked for, but getting the rhino over in the APRS domain gets all the APRS features.
>
> --
> 73, Steve, K9DCI
>
>




More information about the aprssig mailing list