[aprssig] objects not being released

Andre aprs at pe1rdw.demon.nl
Sun Jan 1 13:43:22 EST 2012


Op 1-1-2012 19:14, Bob Bruninga schreef:
> Apparently WINLINK is not listening and accepting new OBJECTS.  Same will also happen if one tries to takeover a local FREQ object being properly sourced at a digi.
>
> The digi does not listen for updates...
>
> Bob, WB4APR
at least the digi only sends on request and has someone to contact.
>>    I'm trying to correct a mistake in an object of my
>>    winlink gateway, I adopted the object in ui-view
>>    expecting the incorrect object to stop sending, this
>>    is what I send out on APRS-IS
>>
>>    17:05:55R PE1RDW>APU25N,APRUDP*,PE1RDW-2*,WIDE2-1
>>    Port=1<UI C
>>    Len=71>:;PI1HSD-10*011605z5143.44NW00508.07Ea144.850MHz
>>    1200 R12m BPQ32 Public
>>
>>    To my surprice the object just changed back to the
>>    wrong setting:
>>
>>    WINLINK>APWL2K,TCPIP*,qAC,T2CMH:;PI1HSD-10*010513z5143.
>>    NW00507.  Ea144.850MHz 1200 R12m RMSPacket Public
>>
>>    Anyone got an idea why the object takeover is not
>>    working as per the specs and who to contact?
>>
>>    73 Andre PE1RDW
>> ________________
>> _______________________________________________
>> aprssig mailing list
>> aprssig at tapr.org
>> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>





More information about the aprssig mailing list