[aprssig] digital panel meter help

[Lee Mushel]

Rough hole made with twist drills then a little file work and things turned out well using a standard blank rack panel.

73

Lee  K9WRU
  ----- Original Message ----- 
  From: joe at dellabarba.com 
  To: TAPR APRS Mailing List 
  Sent: Monday, October 17, 2011 5:48 AM
  Subject: [aprssig] digital panel meter help


  There are a ton of LED and LCD meters on FleaBay for cheap> I have one for an APRS project I am building, but I am at a loss for mounting it. Cutting out an opening for it is very tricky because there is about 1 MM between too small and too big. Has anyone ever seen any kind of prmade mounting bezels for these meters? 



  THANKS 

  73 

  Joe N3HGB 



------------------------------------------------------------------------------


  _______________________________________________
  aprssig mailing list
  aprssig at tapr.org
  https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20111018/6a09ec70/attachment.html>