[aprssig] Fwd: How do I flash my d710a

[Jerry Wyatt]

Make sure you use the new MCP 2A 3.20 to save/restore your configuration data, 
   since the flash/upgrade requires three full resets.

Jerry - N7QVU


----- Original Message ----
> From: "la3qma at aprs.la" <la3qma at aprs.la>
> To: aprssig at tapr.org
> Sent: Sat, May 28, 2011 10:01:20 PM
> Subject: Re: [aprssig] Fwd: How do I flash my d710a
> 
> Quoting "Andrew Rich" <vk4tec at tech-software.net>:
> 
> >> Hello
> >>
> >> Do you flash the d710a by using the ps2 connector on the head ?
> >>
> 
> 1. Connect it to the radio unit and flash that first.
> 2. Then connect it to the display and update the display
> 3. Then update the TNC.
> 
> Or
> 
> 1. Connect it to the display and update the display
> 2. Then update the TNC.
> 3. Connect it to the radio unit and flash that first.
> 
> 
> Kai Günter
> LA3QMA
> 
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>