[aprssig] Blutooth GPS under LINUX

[Andrew Rich]

This seems to be looking for serial.conf.

I have this set to

#
# RFCOMM configuration file.
#

rfcomm0 {
#       # Automatically bind the device at startup
        bind yes;
#
#       # Bluetooth address of the device
        device 00:30:04:0C:C9:E6;
#
#       # RFCOMM channel for the connection
        channel 1;
#
#       # Description of the connection
        comment "Example Bluetooth device";
}


----- Original Message ----- 
From: "Dan Smith" <dsmith at danplanet.com>
To: "Andrew Rich" <vk4tec at tech-software.net>; "TAPR APRS Mailing List" 
<aprssig at tapr.org>
Sent: Tuesday, May 03, 2011 11:56 PM
Subject: Re: [aprssig] Blutooth GPS under LINUX


>> Not sure how / where to access NMEA ?
>
> With other bluetooth serial devices, I've used rfcomm to get /dev/rfcomm0 
> (or the like) connected to the serial output.  That may be where your NMEA 
> data is.
>
> -- 
> Dan Smith
> www.danplanet.com
> KK7DS
>