[aprssig] KPC3+ induced errors (was: KC0YA-11 and AE0SS-11 Balloons Aloft)
Russ Chadwick
russ at wxqa.com
Mon Mar 14 13:20:16 EDT 2011
On 7:59 PM, Stephen H. Smith wrote:
> On 3/13/2011 1:42 PM, Russ Chadwick wrote:
>> Earlier today I posted under this subject line that the I-gate that
>> caused most of the packet delay problem with the EOSS balloon flights
>> yesterday was using a KPC-3+ TNC. That was incorrect. He was using
>> a D710 receiving 144.340 MHz and connected to UI-View sending packets
>> through Comcast to first.aprs.net.
>>
>> Russ
>>
>>
>>
>> _
>
> Was he using the D710 in KISS mode or normal command mode?
>
> [The earlier D700 mobile and TH-D7 hand-held had notoriously poor KISS
> handling, due to a too-small buffer in the TNC chip.]
Stephan,
Mark reports that he was using normal command mode. The callsign of his
I-gate is KC0D-3.
Russ
>
> -------------------------------------------------------------------------------
>
>
> --
>
> Stephen H. Smith wa8lmf (at) aol.com
> EchoLink Node: WA8LMF or 14400 [Think bottom of the 2M band]
> Skype: WA8LMF
> Home Page: http://wa8lmf.net
>
> ===== Vista & Win7 Install Issues for UI-View and Precision Mapping
> =====
> http://wa8lmf.net/aprs/UIview_Notes.htm#VistaWin7
>
> *** HF APRS over PSK63 ***
> http://wa8lmf.net/APRS_PSK63/index.htm
>
> "APRS 101" Explanation of APRS Path Selection & Digipeating
> http://wa8lmf.net/DigiPaths
>
>
>
>
>
More information about the aprssig
mailing list