[aprssig] Nuvi 350 - D710 error message

[Rudy Benner]

Which of the 2 usb ports on the 350 are you using for the power?

-----Original Message----- 
From: Jack Swift
Sent: Monday, May 30, 2011 7:06 PM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] Nuvi 350 - D710 error message

i've had it with my 700 - it's one of 'those' gremlins... can't
remember the fix - might be the nuvi's interface (garmin-garmin?)

i'm pretty sure that it's not the cable because i've never replaced that.

On Mon, May 30, 2011 at 6:57 PM, Sam Guccione <gucci1 at mchsi.com> wrote:
> I updated by nuvi maps and updated the D710 yesterday. Attached numi to 
> D710
> with Argent cable and pressed the BCON button. I got this message "This
> accessory is not supported."
>
> I can clear the message by touching OK. The nuvi is sending aprs locations
> to the screen ok.
>
> Not sure if this is telling me my Argent cable is bad or the D710 updates
> changed something or my map update changed the nuvi. Anyone experienced 
> this
> message? Have never had
> It before. Ran the D710-Nuvi for at least one year in the car without
> failure.
>
> Thanks, Sam K3BY
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>



-- 
vvvvvvvvvvvvvvvvvvvvvvvv
Jack Swift, N8WAV
Houghton County ARES/RACES EC/RO
105 E. Douglass Ave.
Houghton, MI 49931
906-482-0530, 281-5300
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

_______________________________________________
aprssig mailing list
aprssig at tapr.org
https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig