[aprssig] Thd72a power

[Andrew Rich]

In fact the manual says do not TX from the volts in when the battery is 
connected

And only charge the battery with the radio OFF

and then a car adaptor from kenwood says it is ok to use and charge the 
battery at the same time.

I am confused

- Andrew -


----- Original Message ----- 
From: "Andrew Rich" <vk4tec at tech-software.net>
To: "TAPR APRS Mailing List" <aprssig at tapr.org>
Sent: Sunday, January 16, 2011 7:16 PM
Subject: [aprssig] Thd72a power


> When I run the ht off battery only the ht will emit 5 watts
>
> When I run th ht off a power supply that can not supply the required amps 
> to tx, the radio resets
>
> I would have thought the ht would draw power from the battery with power 
> applied ?
>
> Maybe kenwood have designed it differently ?
>
> So the power socket on a thd72 must not be a low current charger but a 
> full psu ?
>
> Andrew vk4tec
>
>
>
> Sent from my iPhone
> Andrew Rich
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig