[aprssig] Help with repeater beacon

[Richard Sharp, KQ4KX]

If the repeater object is formatted this way the repeater offset works just
fine.  Note the offset indicator after the C127 (the offset should have a
space on both sides).   I've noticed since the 2m side of the D710 has auto
offset the indicator on the object isn't necessary - unless a user has the
auto offset turned off.  For the 70cm side though the offset indicator is
required.

 

 

;146.685_L*111111z2802.99N/08156.54Wr146.685MHz C127 - R25m lakelandarc.org

 

;444.950_B*111111z2752.80N/08148.94Wr444.950MHz C127 + R40m

 

 

Hope this helps.

 

Richard

 

From: David Dobbins

 

My experience has been the data is formatted correctly when received by my
D710, and when I hit the TUNE button it opens that data in the VFO ok, but
the frequency offset is not programmed. I know from experience to add the -
or + as necessary, and then the repeater access works fine. Have tried this
during my travels across the western USA with similar results. I don't
believe I've ever come across one that the repeater offset "transitioned"
ok.

 

Dave K7GPS

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20110219/7ef84098/attachment.html>