[aprssig] PacComm 5.0.1

[Jim WU3V]

I have used G8BPQ's JKISS and patched the eprom to set the inital txd to 
smaller values 500ms is just a bit too long.
you can use the TAPR eproms in the paccomm units those memory locations are 
published.

Jim wu3v

----- Original Message ----- 
From: "Mark Cheavens" <mcheavens at usa.net>
To: "TAPR APRS Mailing List" <aprssig at tapr.org>
Sent: Thursday, May 27, 2010 13:15
Subject: [aprssig] PacComm 5.0.1


> Does anyone have the locations of the key parameters for the PacComm 5.0.1 
> EProm?
>
> I have found and changed "NOCALL" to my call, but I would really like to 
> be able to burn a default ROM with KISS ON, and ECHO ON
>
> I really don't want to have to manually find the bitmask 
> locations.........
>
> Mark Cheavens
> KC5EVE
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>