[aprssig] Kenwood D700A Control Head Brackets

[Tim Cunningham]

Some ham stores carry them or can order them.

Panavise also makes various custom brackets for most vehicles for a nice installation. Here is my panavise custom mount than was easy to install on the dash: http://qsl.net/n8deu/Jeep/Panavise_Jeep.htm

I only had to remove a piece of trim panel. No holes to drill as the mount took advantage of the am/fm radio mount. Removed a screw holding the radio, put the panavise in place, and put the screw back in place which also holds the panavise mount.


73's,
Tim - N8DEU






  ----- Original Message ----- 
  From: Joel Maslak (N7XUC) 
  To: TAPR APRS Mailing List 
  Sent: Wednesday, March 17, 2010 9:58 PM
  Subject: [aprssig] Kenwood D700A Control Head Brackets


  Does anyone have a good source to get a D700A control head bracket?  I've lost my original bracket and am looking for a replacement. 


------------------------------------------------------------------------------


  _______________________________________________
  aprssig mailing list
  aprssig at tapr.org
  https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20100318/17585f4a/attachment.html>