[aprssig] 3' snow emergency (generators)

K7FTP k7ftp at k7ftp.net
Tue Feb 9 19:43:57 EST 2010


Look into a material called "tannerite".  Two-part explosive.  It requires 
you to shoot it to set it off, but it can be shipped easily.
----- Original Message ----- 
From: "Patrick" <winston at winston1.net>
To: "TAPR APRS Mailing List" <aprssig at tapr.org>
Sent: Tuesday, February 09, 2010 2:18 PM
Subject: Re: [aprssig] 3' snow emergency (generators)


>I do however foresee a problem getting FCC clearances...  Would  definitely 
>have to be a partial kit because you wouldn't want to have  to deal with 
>the paperwork for transport of some of the materials..
>
> p
>
> Quoting Scott Miller <scott at opentrac.org>:
>
>> Eric Deering wrote:
>>> I never realized that electricity had so much to do with aprs. I  sure 
>>> am glad I signed up for this list.
>>
>> Just try doing APRS *without* electricity.  =]
>>
>> (I was actually trying to figure out at one point if you could stack  up 
>> a bunch of piezoelectric discs of varying thicknesses, connected  to a 
>> conductive rod and spaced with insulating material, to generate  a radio 
>> pulse using a small explosive charge.  Sounds like a good  excuse to blow 
>> stuff up in the name of science, anyway.)
>>
>> Scott
>> N1VG
>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at tapr.org
>> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig 





More information about the aprssig mailing list