[aprssig] Dayton Travel Day (smokie)

Robert Bruninga bruninga at usna.edu
Fri Apr 30 12:56:22 EDT 2010

> Dayton Travel day approaches in 2 wks! (Th, Fr, Sat, Sun)

Pre-load your D700/710 with a few OBJECT names...  If you see a
situation of interest to your fellow travelers, you can send out
the OBJECT at your present location..  You would never use this
of course, to avoid a SMOKIE speed trap, but only to help fellow
motorists find a partially hidden policeman (or other object) in
time of need...

You can save up to 4 such objects in your other 4 PM's
temporarily.  The only requirements in those PM's are these:
  STATUS = "de CCCCCC"  <= your call
  GPS ON  clearly you cannot use a fixed posit here...

And optionally if available:
  PATH   = WIDE1-1 (though any path will do...)
  PKT TX = MANUAL, but any existing one will do

Notice that only the first three are required, and one status
can be re-used by any PM.  So for the Dayton travel weekend, you
can actually re-use any of your existing PM's by making only
those 2 changes, and then remembering to change them back after
the trip.

When you want to transmit an OBJECT, just switch to that PM,
press the BCON button a few times in the next 30 seconds until
you think you got out.  Do not keep sending it further down the
road, because you don't want it to follow you!  THEN switch back
to your regular traveling PM.  Enjoy, Bob, WB4APR

> Every local area within a day's drive of Dayton should make
> their APRS local digi is putting out their local freq object
> travelers.  Please see www.aprs.org/localinfo.html If you
> check your own local area, who will?
> Simply turn your APRS mobile radio on, wait 10 minutes, and
> local recommended VOICE frequency should show up.  If it
> doesn't, then organize your locals to get it on there.
> There is nothing more fun than driving to dayton and TALKING
> other APRS ops along the way...
> Bob, WB4APR 
> > -----Original Message-----
> > I would like to xmit via RF our local UHF repeater as an
> object.
> > 
> > How do I go about transmitting the object from my APRS 
> > Station via RF.  I want local stations traveling through to 
> > see that object on their radio so that they are aware of our

> > repeater and its coverage and tone requirement.
> > 
> > I am versed in sending messages on APRS and see other people

> > transmitting objects over RF but I am not sure what method
> > used to send the object.  I know how to send a message but 
> > have no idea what I use to send the object out.   I have
> > at home and mobile and both are RF with the one at home 
> > having internet access. 
> > 
> > I am not interested in creating an object on my computer and

> > having it show up on other pc running UIVIEW.  I am 
> > interested in making sure mobiles receive this via RF on 
> > their APRS device in the vehicle. If a by product of this is

> > that it will also get gated to the internet that is fine.
> > 
> > Thanks,
> > 
> > Sam Cederas
> > K4OC
> > Cary,N.C.
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig

More information about the aprssig mailing list