[aprssig] Alinco DR-M06

[Michael Wolthuis]

Ed,
I am hooking it to a KPC3+.  What I don't know is if I can get audio from
the MIC pin on the jack or if I have to use a stereo plug in the back.

Do you know for the DR-M06 specifically if audio is on the front connector?

Mike
kb8zgl



On 9/16/09 11:32 AM, "Ed L Locklear" <kf4chg at gmail.com> wrote:

> On Tue, Sep 15, 2009 at 1:57 PM, Michael Wolthuis <wolthui3 at msu.edu> wrote:
>> Does anyone have the MIC connector pinouts for an Alinco DR-M06 for 6M APRS
>> mobile?  I can¹t find them in my manual, but it changes to Japanese half way
>> through.
>> 
>> Mike
>> kb8zgl
> 
> Mike,
> 
> Here is the direct PDF download for the 8 pin mic from Alinco:
> 
> http://www.alinco.com/pdf.files/Tech/Mic/MIC_JACK8PIN_ASSN.pdf
> 
> I don't remember you mentioning what type of TNC your using however, I
> could possibly help with this also, unless you've already got what you
> need.
> 
> Ed, KF4CHG
> 
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>