[aprssig] Disregard last - Google finally turned it up

[Stephen H. Smith]

Michael Wolthuis wrote:
> Here is the pinouts for an Alinco 6M mobile.
>
> http://inrd.gotdns.com/alinco/MIC_JACK8PIN_ASSN.pdf
>
> Mike
> kb8zgl
> ------------------------------------------------------------------------
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>   

This is the same pin-out used by Kenwood, except that the DC power pin 
is +5 rather than +8, and the inconsistent use of pin 6.    On Kenwoods, 
this pin is either not connected, or it has fixed low-level receive 
audio.   Alinco seems to use this pin for a variety of uses on diffent 
models according to the diagram above. 


My print of Kenwood plugs and jacks at:   

     <http://wa8lmf.net/miscinfoi>  

Scroll down the list fo downloadable stuff and look for   

      Kenmic-Plug-8.pdf
      Kenmic-Jack-8.pd
      Kenwood-8-Pin-Mic-Plug.pdf
      Kenwood-8-Pin-Mic-Jack.pdf



------------------------------------------------------------------------

--

Stephen H. Smith    wa8lmf (at) aol.com
EchoLink Node:      WA8LMF  or 14400    [Think bottom of the 2M band]
Skype:        WA8LMF
Home Page:          http://wa8lmf.net

NEW!  HF APRS Notes & Guide
  http://wa8lmf.net/aprs/HF_APRS_Notes.htm

"APRS 101"  Explanation of APRS Path Selection & Digipeating
  http://wa8lmf.net/DigiPaths

Updated "Rev H" APRS            http://wa8lmf.net/aprs
Symbols Set for UI-View,
UIpoint and APRSplus: