[aprssig] Reminder for US members: Reset the time in your radios

Andrew Rich vk4tec at tech-software.net
Sat Oct 31 18:31:26 EDT 2009


Offset is used to display anything you want non UTC

Need to understand what else it affects

----- Original Message ----- 
From: "Steve Noskowicz" <noskosteve at yahoo.com>
To: "TAPR APRS Mailing List" <aprssig at tapr.org>
Sent: Sunday, November 01, 2009 8:20 AM
Subject: Re: [aprssig] Reminder for US members: Reset the time in your 

--- Randy Allen  wrote:

> "Using a GPS you can press POS and select "symbol of a
> clock"SET"

Mine's different.

> Does that set the hours as well? On the D700 it only
> synchs minutes and seconds with the GPS.

Am I drinking the wrong brand?

 Sync GPS and radio??  HUH?

Set the GPS time zone and set the D700 time and zone/offset independantly, I 

BTW: I never did understand what the D700 time and offset were used for.  Is 
it only the local display of time and time tag on packets?? Then why offset?
Does some information come to the D700 over RF that must be corrected form 
UTC??   OR PERHAPS does the D700 send UTC in any packets??

I'm glat I included these time changes in my Excel sheets in the last rev. 
This is a pain in the Menu to do.  Shoulda' been only one setting change 
either DST on/off ot offset change (time follows unless changed  AFTERWORD.
73, Steve, K9DCI
Too much to remember and or absorbe...

aprssig mailing list
aprssig at tapr.org


No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.423 / Virus Database: 270.14.39/2470 - Release Date: 10/30/09 

More information about the aprssig mailing list