[aprssig] Stand Alone WX
Michael Wolthuis
wolthui3 at msu.edu
Tue Jun 23 08:03:56 EDT 2009
Yes, it will send the data. Will another d710 decode the data over the air?
That is the question.
Mike
kb8zgl
On 6/22/09 11:43 PM, "Ben Lindner-VK5JFK" <vk5jfk at activ8.net.au> wrote:
> The D710 will decode Peet Bros and Davis. I have had my Davis directly
> connected to the radio and every 5mins out goes the data.
>
> All this information is in the instruction book
>
> regards
> Ben
> VK5JFK
>
> Michael Wolthuis wrote:
>> Is there maybe a mode that the d710 does decode? We run our Peet units in
>> Packet Mode, but they do not decode on d710.
>>
>> Thanks,
>> Mike
>> kb8zgl
>>
>>
>>
>> On 6/22/09 1:01 PM, "Tyler Griffiths" <n7uwx at comcast.net> wrote:
>>
>>
>>> The TM-D710 does not decode unless I set the wx station wrong.
>>>
>>> Tyler
>>>
>>> On Mon, Jun 22, 2009 at 7:56 AM, Robert Bruninga<bruninga at usna.edu> wrote:
>>>
>>>>> Speaking of Peet Brothers...
>>>>> We set up an 2100 running directly into a TNC
>>>>> for the Weather Service (KF6RAL-3)and noticed
>>>>> the data never gets seen by the Kenwood radios.
>>>>>
>>>> We did not expect to see raw WX formats on the air. At the time
>>>> of the APRS spec, there were 4 different formats from Peet Bros,
>>>> and 3 different instruments from Davis, and new ones were being
>>>> introduced every year. It was impossible to see the future and
>>>> see what would be the dominant formats. The APRS spec only had
>>>> one, and it was assumed that any remote APRS WX station would
>>>> have a processor to convert to the on-air APRS format.
>>>>
>>>> Now Opentrack and Byonics and others have stations that can do
>>>> the conversions.
>>>>
>>>> Also the TM-D710 does decode the Peet Packet mode on the air...
>>>> I think...
>>>>
>>>> Bob
>>>>
>>>>
>>>>
>>>>> On Sun, Jun 21, 2009 at 9:35 AM, Kriss A. Kliegle
>>>>> <kliegle at myfairpoint.net> wrote:
>>>>>
>>>>>
>>>>> I've been running a Peet for years as a stand alone WX
>>>>> digi. Since my site is solar powered, the power consumption
>>>>> is minimal. Just don't use/buy one w/a humidity sensor. They
>>>>> don't last but a few months, gave up replacing them. Another
>>>>> issue yet to be resolved is the flow of WX data to the KPC-3,
>>>>> usually in winter.Data will stop being updated and will send
>>>>> same temp and winds every transmission, or it will be corrupt
>>>>> and give rediculous temp and wind readings until I climb the
>>>>> hill and reset the Peet Bro WX Station, KPC-3, and/or both. I
>>>>> thought it was temperature related, but installing everything
>>>>> in a styrofoam cooler and using the heat of the radio's
>>>>> finals ( IC-2000 ) still didn't stop the unreliable WX data.
>>>>> Temp in the cooler was >60, even in the coldest of winter WX
>>>>>
>>>> in NH.
>>>>
>>>>> Kriss KA1GJU (-3 WX Digi)
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> aprssig mailing list
>>>>> aprssig at tapr.org
>>>>> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Tyler Griffiths
>>>>> N7UWX
>>>>>
>>>>> See where I am:
>>>>> http://map.findu.com/n7uwx-12
>>>>> P. J. O'Rourke
>>>>> <http://www.brainyquote.com/quotes/authors/p/p_j_orourke.html>
>>>>> - "If government were a product, selling it would be
>>>>>
>>>> illegal."
>>>>
>>>> _______________________________________________
>>>> aprssig mailing list
>>>> aprssig at tapr.org
>>>> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>>>
>>>>
>>>
>>
>>
>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at tapr.org
>> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>
>> ------------------------------------------------------------------------
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com
>> Version: 8.5.339 / Virus Database: 270.12.88/2196 - Release Date: 06/22/09
>> 18:11:00
>>
>>
>
> _______________________________________________
> aprssig mailing list
> aprssig at tapr.org
> https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
More information about the aprssig
mailing list