[aprssig] UI-VIEW tcp/ip only question

[Andrew Rich]

Make sure your callsign and passcode are populated.

Set your internet tx time to 60 minutes.

There should be no path


  ----- Original Message ----- 
  From: Rusty Bryant 
  To: TAPR APRS Mailing List 
  Sent: Saturday, June 06, 2009 1:06 AM
  Subject: [aprssig] UI-VIEW tcp/ip only question


        All,

        I am currently away from my home station where I run UI-VIEW 32.  I do have it installed on my laptop which I have with me.  I am connected to an aprs server and am receiving packets, however I am not able to transmit packets back through the internet.  I have no radio attached and just want to be able to transmit over the internet.  What should my unproto path be to allow for this?

        I'm sure its a simple answer but i can't figure it out...

        thanks

        Rusty
        WB4BSD
       




------------------------------------------------------------------------------


  _______________________________________________
  aprssig mailing list
  aprssig at tapr.org
  https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig



------------------------------------------------------------------------------



  No virus found in this incoming message.
  Checked by AVG - www.avg.com 
  Version: 8.5.339 / Virus Database: 270.12.53/2155 - Release Date: 06/04/09 17:55:00
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20090606/fe8b9bfe/attachment.html>