[aprssig] TNCX setups?

[Kai Gunter Brandt]

Robert Bruninga wrote:
>> TNC-X with the XDigi module is great as long as the latest
> firmware is
>> used. Now its possible to remote configure it too.
>>
>> It's easy to setup as a Fill-In or a WideN digi with the SSn 
>> possibility
>> too.
> 
> Can you send us the setup commnds to make it New-N compliant?
> Does it use UIFLOOD and UITRACE? Etc
> 
> Bob, WB4APR
> 

A bit modified from www.aprsla.net

              C.     Set Digipeater Callsign.         :URCALL
A.     Set Digipeater Alias.            :URDIGI
F.     Set UIFlood Callsign.            :NOR (Norway use this as SSn)
L.     Set UIFlood Limit.               :7
T.     Set UITrace Callsign.            :WIDE
M.     Set UITrace Limit.               :3
1.     Set UICall 1.                    :
2.     Set UICall 2.                    :
3.     Set UICall 3.                    :
4.     Set UICall 4.                    :
5.     Set UICall 5.                    :
6.     Set UICall 6.                    :
7.     Set UICall 7.                    :
8.     Set UICall 8.                    :
D.     Set Dupe Time (x5 secs).         :2

B.     Set Beacons
0. Beacon Destination Call :APNX01
1. Beacon 1 Path :                    (direct path)
2. Beacon 2 Path :WIDE2-1
3. Beacon 3 Path :WIDE2-2
4. Beacon 4 Path :NOR3-3

5. Beacon 1 inteval (x5 secs) :00120 Offset :0       (10.min)
6. Beacon 2 inteval (x5 secs) :00360 Offset :240     (30.min)
7. Beacon 3 inteval (x5 secs) :00720 Offset :120     (60min)
8. Beacon 4 inteval (x5 secs) :00720 Offset :255     (60min)

A. Beacon 1 text:
;LA7BR *111111z6023.06N/00514.98Er434.700MHz T097 -2000kHz

(The modified RX/TX TM-D710 requires the split in kHz as MHz doesn't work)

B. Beacon 2 text:!0000.00NS00000.00E#PHG0000 W3,NORn SomePlace
C. Beacon 3 text:!0000.00NS00000.00E#PHG0000 W3,NORn SomePlace
D. Beacon 4 text:!0000.00NS00000.00E#PHG0000 W3,NORn SomePlace

Q. Quit


For a Fill-In i use UICall 1: WIDE1-1 and have UIFlood and UITrace empty.

Kai Gunter
LA3QMA