[aprssig] PPM APRS

[Andrew Rich]

www.tech-software.net

SBS-1


  ----- Original Message ----- 
  From: Jeff King 
  To: TAPR APRS Mailing List 
  Sent: Thursday, July 02, 2009 7:45 AM
  Subject: Re: [aprssig] PPM APRS


  Andrew:

  Do you have any good web links that explain Mode S/ADS-B, the tech specs, formats etc?

  What kind of reciever are you using.

  Thanks

  Jeff  N4864S


  On Wed, Jul 1, 2009 at 5:12 PM, Andrew Rich <vk4tec at tech-software.net> wrote:

    There are heaps of cheap video tx modules around.

    Is there any reason why they can't be PulsePositionModulated ? 

    Should be enough bandwidth 

    I have been looking closely at MODE S aircraft signals - 1 MB at 8MHz bandwidth

    Sounds like a click. Sends position

    Also been looking at AIS - 9600 self organising GMSK. 

    Maybe good ole 1200 baud will be a round for a while.

    I have been using radio modules - 19k2 on air - 100 mW beef up to 30 watts.

    Andrew



    _______________________________________________
    aprssig mailing list
    aprssig at tapr.org
    https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig






------------------------------------------------------------------------------


  _______________________________________________
  aprssig mailing list
  aprssig at tapr.org
  https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig



------------------------------------------------------------------------------



  No virus found in this incoming message.
  Checked by AVG - www.avg.com 
  Version: 8.5.375 / Virus Database: 270.13.2/2213 - Release Date: 07/01/09 18:07:00
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20090702/d186b9ed/attachment.html>