[aprssig] SheevaPlug plug computers for igates?

[Mark Cheavens]

My "plan" is to put JavaAPRS on the SheevaPlugs I ordered yesterday, 
use a TNCx with the available USB interface directly onboard, coupled 
to a good radio. (I use a lot of GE Delta's and Phoenix's)

Mark
KC5EVE
At 03:42 AM 2/25/2009, you wrote:

>    These new devices, currently priced around $100, might be interesting,
>if someone would like to start to produce low-powered igate kits, or set
>up small igates as custom projects. There's no audio or RS-232
>transceivers, but there are two UARTs. 512M DDR2 SDRAM, 512M NAND FLASH,
>1.2 GHz ARMv5 CPU, gigabit ethernet and a USB2 host. Maybe a small
>receiver and modem would fit in the box.
>
>http://www.linuxdevices.com/news/NS9634061300.html
>http://www.engadget.com/2009/02/24/marvells-sheevaplug-linux-pc-fits-in-its-power-adapter/
>http://www.marvell.com/products/embedded_processors/developer/kirkwood/sheevaplug.jsp
>http://www.globalscaletechnologies.com/p-22-sheevaplug-dev-kit.aspx
>http://www.pogoplug.com/
>
>    - Hessu, OH7LZB
>
>
>_______________________________________________
>aprssig mailing list
>aprssig at tapr.org
>https://www.tapr.org/cgi-bin/mailman/listinfo/aprssig