[aprssig] UIDIGI vs UITRACE

[Cap Pennell]

The Yaesu VX-8R HT manufacturer's _default_ path is already WIDE1-1,WIDE2-1
which is the best mobile or portable routine digi path.

 

That is, WIDE1-1 in "PASS  Number 1" and also WIDE2-1 in "PASS  Number 2".
Passes 3 thru 8 remain blank, unused.

 

(as per Page 86 of your VX-8R Operating Manual)

 

73, Cap KE6AFE

 

From: aprssig-bounces at tapr.org [mailto:aprssig-bounces at tapr.org] On Behalf
Of Amir K9CHP
Sent: Thursday, February 12, 2009 9:05 AM
To: bruninga at usna.edu; TAPR APRS Mailing List
Subject: Re: [aprssig] UIDIGI vs UITRACE

 

One remark: the VX-8 is only able to have a path of WIDE1 - 1 or WIDE2 -1.
There are 8 slots for a single path each. There is no possibility for a
choice of paths as in WIDE1-1,WIDE2-1 in a single slot. 


           73 de Amir, K9CHP WAS, WAC, VE (ARRL and W5YI)
            www.K9CHP.net <http://www.K9CHP.net/>  http://k9chp.blogspot.com
<http://k9chp.blogspot.com/> 
            Eagle Valley Search Dogs http://evdogs.org/ K9 Handler (SAR)
            NYS Federation Certification Tester
            1st Special Response Group (1SRG) www.1srg.org
<http://www.1srg.org/> 

 



Robert Bruninga wrote: 






 
OK, several important issues here.
 
1) Set the path of WIDE1-1,WIDE2-1 in your APRS HT and now it
will work via your Jeep or via any other digi that hears it, and
you don't have to remmember to switch paths in the HT depending
on where you are.
 
  
 
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20090212/2d66d737/attachment.html>