[aprssig] WIDEn-N vs. RELAY,WIDE

[Chris Rose]

If the smaller increment is first, won't it not allow
the larger increment to even be used?  
The 1-1 increment will be used up and then the digis
that already heard the 1-1 will ignore the 2-2 that
comes later?  

Chris 
KB8UIH

--- Cap Pennell <cap at cruzio.com> wrote:

> Yes, but what Clay and everybody else mobile (in
> North America at least)
> wants to leave in there for the road is
> WIDE1-1,WIDE2-1
> Mobiles don't need to change their paths, and they
> don't want RELAY nor WIDE
> nor WIDE2-2 nor "W1,W2".
> Three-hop paths like WIDE3-3 and "W1,W2"
> (WIDE1-1,WIDE2-2) are unhelpful,
> detrimental to our shared VHF network.
> 73, Cap ke6afe
> 
> > -----Original Message-----
> > From: aprssig-bounces at lists.tapr.org
> > [mailto:aprssig-bounces at lists.tapr.org]On Behalf
> Of Robert Bruninga
> > Sent: Friday, March 21, 2008 14:01 PM
> > To: 'TAPR APRS Mailing List'; AA3JY at Winlink.org
> > Subject: RE: [aprssig] WIDEn-N vs. RELAY,WIDE
> >
> >
> > Remember how easy it is to change path in the D7.
> >
> > You don't have to spell it all out.  It will
> expand these
> > abbreviations:
> >
> > R = RELAY
> > W = WIDE
> > W2 = WIDE2-2.
> >
> > But to get WIDE2-1, you have to spell the whole
> thing out.
> > So RELAY WIDE can be entered as "R,W"
> > WIDE2-2 can be entered as "W2"
> > And WIDE1-1,WIDE2-2 can be entered as "W1,W2"
> >
> > etc
> > Bob, Wb4APR
> >
> >
> > > -----Original Message-----
> > > From: aprssig-bounces at lists.tapr.org
> > > [mailto:aprssig-bounces at lists.tapr.org] On
> Behalf Of Eric
> > Christensen
> > > Sent: Friday, March 21, 2008 1:27 PM
> > > To: AA3JY at Winlink.org; TAPR APRS Mailing List
> > > Subject: Re: [aprssig] WIDEn-N vs. RELAY,WIDE
> > >
> > > The D7A doesn't do multiple paths without
> manually changing
> > > them in the
> > > menu.
> > >
> > > 73s,
> > > Eric W4OTN
> > > http://www.ericsatcom.net
> > >
> > >
> > >
> > > AA3JY at Winlink.org wrote:
> > > > I'm planning a cross country journey this
> summer on the M/C
> > > and was wondering what parts of the country
> still use the old
> > > path of RELAY,WIDE? How would one with a D7A,
> program if more
> > > than one path is used with out having to
> manually
> > > reconfiguring to comply with the change in an
> unknown area
> > > still using the old RELAY,WIDE path?
> > > >
> > > > Regards,
> > > >
> > > > Clay AA3JY
> > > > BMW K1200RS
> > > > (via WL2K)
> > > >
> > > >
> > > >
> _______________________________________________
> > > > aprssig mailing list
> > > > aprssig at lists.tapr.org
> > > >
>
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> > >
> > > _______________________________________________
> > > aprssig mailing list
> > > aprssig at lists.tapr.org
> > >
>
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> > >
> >
> >
> > _______________________________________________
> > aprssig mailing list
> > aprssig at lists.tapr.org
> >
>
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> >
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
>
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>