[aprssig] WIDEn-N vs. RELAY,WIDE

[Robert Bruninga]

Remember how easy it is to change path in the D7.

You don't have to spell it all out.  It will expand these
abbreviations:

R = RELAY
W = WIDE
W2 = WIDE2-2.

But to get WIDE2-1, you have to spell the whole thing out.
So RELAY WIDE can be entered as "R,W"
WIDE2-2 can be entered as "W2"
And WIDE1-1,WIDE2-2 can be entered as "W1,W2"

etc
Bob, Wb4APR
 

> -----Original Message-----
> From: aprssig-bounces at lists.tapr.org 
> [mailto:aprssig-bounces at lists.tapr.org] On Behalf Of Eric
Christensen
> Sent: Friday, March 21, 2008 1:27 PM
> To: AA3JY at Winlink.org; TAPR APRS Mailing List
> Subject: Re: [aprssig] WIDEn-N vs. RELAY,WIDE
> 
> The D7A doesn't do multiple paths without manually changing 
> them in the 
> menu.
> 
> 73s,
> Eric W4OTN
> http://www.ericsatcom.net
> 
> 
> 
> AA3JY at Winlink.org wrote:
> > I'm planning a cross country journey this summer on the M/C 
> and was wondering what parts of the country still use the old 
> path of RELAY,WIDE? How would one with a D7A, program if more 
> than one path is used with out having to manually 
> reconfiguring to comply with the change in an unknown area 
> still using the old RELAY,WIDE path?
> > 
> > Regards,
> > 
> > Clay AA3JY
> > BMW K1200RS
> > (via WL2K)
> > 
> > 
> > _______________________________________________
> > aprssig mailing list
> > aprssig at lists.tapr.org
> > https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>