[aprssig] HF APRS Transceiver

[Geri.Norris]

Howdy;
CW is a continuous wave and for APRS you will need a modulated signal 
for the packet data (ones and zeroes) to travel on.
 CW is a single tone transmitter instead of several tones (voice 
modulated) if you want to look at it this way.
Geri N5RIG
  

Eric H Christensen wrote:
> I've been trying to find the answer to this question for a few days but you can't find good electronics answers anymore.  I'm hoping that there will be someone on here that has more/better electronics experience than I.
>
> MFJ makes a "cheap" CW-only HF transceiver that is for single bands but does allow a small amount of tuning within that band.  What extra circuitry is needed to connect something like an OpenTracker+ to this type of transmitter so it will transmit 300 baud packet?
>
> 73,
> Eric W4OTN
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>