[aprssig] TT4 or OT2 telemetry

scott at opentrac.org scott at opentrac.org
Fri Jun 27 14:39:57 EDT 2008


If you're using a Tracker2, you'd need to use the scripting language to put out a few BEACONs with the telemetry coefficients.

Scott
N1VG
  _____  

From: Alan P. Biddle [mailto:APBIDDLE at UNITED.NET]
To: 'TAPR APRS Mailing List' [mailto:aprssig at lists.tapr.org]
Sent: Thu, 26 Jun 2008 13:33:11 -0700
Subject: Re: [aprssig] TT4 or OT2 telemetry

I was wondering if there is a good discussion about transmitting the
  equations data so you get real units on FINDU or other servers?  In looking
  I find that functionality is built into Bob's APRSDos, and I came across a
  couple of old dedicated hardware units.  However, is there a general
  discussion of how to do this for something like a TT4 with other software?
  The conversion equations are no problem, just how to upload them.  I
  normally use UI-VIEW32 for over the air APRS.  
  
  TNX,
  
  Alan
  WA4SCA
  
  
  
  
  _______________________________________________
  aprssig mailing list
  aprssig at lists.tapr.org
  https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
    
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20080627/a40a33b2/attachment.html>


More information about the aprssig mailing list