[aprssig] Icom V8000

Rusty Bryant rustyb78 at yahoo.com
Fri Jul 4 10:24:52 EDT 2008


kantronics KPC3+




--- On Fri, 7/4/08, Chris Rose <kb8uih at sbcglobal.net> wrote:
From: Chris Rose <kb8uih at sbcglobal.net>
Subject: Re: [aprssig] Icom V8000
To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org>
Date: Friday, July 4, 2008, 1:07 AM

www.buxcomm.com

What TNC?

Chris
KB8UIH

--- bob evinger <wd9eka at evinger.com> wrote:

> I'm using 2 for keyboard packet, one to a KAM and
> another to a MFJ 1274.
> Made the cables up myself though.
> 
> bob 
> wd9eka
> 
> On Thu, 2008-07-03 at 16:36 -0700, Rusty Bryant
> wrote:
> > Is anyone using an Icom V8000 for APRS?
> > 
> > If so, where can I get a data cable to go from the
> radio to the TNC?
> > 
> > Rusty
> > WB4BSD
> > 
> > 
> > _______________________________________________
> > aprssig mailing list
> > aprssig at lists.tapr.org
> >
>
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
>
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 


_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20080704/acb4b3bd/attachment.html>


More information about the aprssig mailing list