[aprssig] THD7A GPS Question

[Ron Tonneson]

Have you verified that there is data on the ring of the 2.5 mm plug?  Put a voltmeter from ground (the sleeve) to the 
ring.  You should see activity once a second.  There should be no voltage on the tip.  Also make sure you are in the GPS 
port, not the PC port.

Ron - K0QVF

Sam Guccione wrote:
> Thank Jason, but I have this setting set at NMEA. That is not the problem.
> Thanks anyway. Sam
> 
> -----Original Message-----
> From: aprssig-bounces at lists.tapr.org
> [mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Jason KG4WSV
> Sent: Saturday, February 16, 2008 7:54 PM
> To: TAPR APRS Mailing List
> Subject: Re: [aprssig] THD7A GPS Question
> 
> 
> You have to tell the D7 you have a GPS.  On the APRS menu, check GPS.
> Values are something like none/NMEA/NMEA96 (the latter for 9600 baud).
>  It defaults to none.
> 
> -Jason
> kg4wsv
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 
>