[aprssig] Old Digi_Ned Refurb

[Scott Miller]

Sure, it has 8 alias slots and you can put whatever you want in them. 
By default, one is allocated to TEMPn-N.

Scott
N1VG

Andy AB9FX wrote:
> Scott,
> is the T2 able to digipeat more then WIDEn-n like SSn-n?
> I couldn't find any info about SSn-n in the manual.
> 73
> Andy
> 
> 
> ----- Original Message ----- From: "Scott Miller" <scott at opentrac.org>
> To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org>
> Sent: Thursday, September 13, 2007 13:42
> Subject: Re: [aprssig] Old Digi_Ned Refurb
> 
> 
>> It was supposed to be shown as out-of-stock on the website - I've got 
>> no more on hand right now, but the first production batch is expected 
>> in a week or two.  There were some delays with missing regulators and 
>> confusion over the LEDs.
>>
>> Scott
>> N1VG
>>
>> Chris Kantarjiev wrote:
>>> The Tracker2 is available in limited quantities now. It does a good
>>> job decoding and digipeating, but only has one (or two) beacons.
>>> That makes it less than idea for digi sites that want to do
>>> new paradigm increasing-path beacons. (I'm hoping that Scott will
>>> eventually "fix" this, so that the T2 is real competition for the 
>>> KPC3+ :-)
>>>
>>> I'm using one at K6DBG-2/CDRVLY, along with a Linksys WRT54G running
>>> aprs4r; the Tracker2 is pretty much just a TNC in that setup.
>>>
>>> Digi_ned is still quite useful, albeit with only three beacons...
>>>
>>> 73 de chris K6DBG
>>>
>>> _______________________________________________
>>> aprssig mailing list
>>> aprssig at lists.tapr.org
>>> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>>
>>>
>>
>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at lists.tapr.org
>> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 
>