[aprssig] PIC and telemetry question
John Hansen
john at coastalchip.com
Fri Jan 26 10:17:09 EST 2007
And note that the hexadecimal value for "0" is 0x30, for "1" is 0x31,
etc. This makes the job easier than it would otherwise be.
John W2FS
Robert Bruninga wrote:
>>How do you get a register that may be say 234 in value, to be
>>sent as ASCII as "2" "3" and "4"
>>
>>Do you process by 100, 10 and 1's ?
>>
>>
>
>Yes, divide by 100, keep remainder, divide by 10, and keep
>remainder...
>Bob
>
>
>_______________________________________________
>aprssig mailing list
>aprssig at lists.tapr.org
>https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>
>
>
More information about the aprssig
mailing list