[aprssig] APRS Sateliite live panel - update

[Andrew Rich]

Gudday

I have re-worked my live satllite panel.

Suggestions welcome.

Shows status and packet counts of PCSAT, ANDE and RAFT.

http://vk4tec.no-ip.org/sat_panel.htm

Regards

-----------------------------------------
Andrew Rich
Amateur radio callsign VK4TEC
email: vk4tec at tech-software.net
web: http://www.tech-software.net
Brisbane AUSTRALIA

  -----Original Message-----
  From: Andrew Rich [mailto:vk4tec at tech-software.net]
  Sent: Wednesday, 24 January 2007 7:20 AM
  To: TAPR APRS Mailing List
  Subject: RE: [aprssig] TM-D700A MANAULS ECTS


  "aprs packet virus "

  Who is this jerk ?

  This is basic stuff.

  -----------------------------------------
  Andrew Rich
  Amateur radio callsign VK4TEC
  email: vk4tec at tech-software.net
  web: http://www.tech-software.net
  Brisbane AUSTRALIA

    -----Original Message-----
    From: julien mervyn dedier [mailto:julien9z4fz at gmail.com]
    Sent: Wednesday, 24 January 2007 6:16 AM
    To: TAPR APRS Mailing List
    Subject: [aprssig] TM-D700A MANAULS ECTS


    Hi to all on the forum thanks again for all the many emails ,for those
of you who do not have the specialized manual here are the links to kenwood
site for all that you need on the tm-d700a.

    In my next email we will go through the steps how to clean all the tnc
with error showing up on aprs, i will show you every detail what to do
before we start to set up the tnc,in fack the correct way is TNC PKT this is
what you see on the console.

    All tnc of kenwood have to be reset in order to clean the tnc while the
radio is working good from the console the tnc is not at it best because of
aprs packet virus have it not at it best ,time and time again lot of us have
been making mistake by using various in the terminal mode to reset all type
of tnc especially tm-d700a this is wrong and not tne correct way in fact you
are only putting the tnc closer to the edge in a build up of packet viruses.

    Yes i rest my tnc with APRS+SA,WINPACK,WINAPRS in terminal mode well the
reset is waste of time no way this can be cleaned ,it will  not be  done in
the correct way.


    NEXT EMAIL  HOW TO CLEAN MY TNC THE RIGHT WAY AND RIGHT WAY ONLY .



    OWENERS MANUAL PDF
ftp://inform.kenwoodusa.com/Manuals\TM-D700A.pdf

    SPECIALIZED MANUAL
ftp://inform.kenwoodusa.com/Manuals\TM-D700A%20Specialized.pdf

    INTERNAL CLOCK AND APRS TIME STAMP
ftp://inform.kenwoodusa.com/Resources\AMA_ApplicationNotes/AAN0027.pdf

    MEMORY CONTROL SOFTWARE
ftp://inform.kenwoodusa.com/Resources\AMA_SoftwareRCPMCP/MCP-D700.ZIP
    --
    THANKS

    JULIEN
    9Z4FZ//TRINIDSA & TOBAGO.
    M0JDD//UNITED KINGDOM.
    M0JDD/J3//GRENADA.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20070124/8b84691d/attachment.html>