[aprssig] 145 MHz QUAD dimensions

[Dave Sloan]

HI Andrew,

   From this web site http://www.softcom.net/users/kd6dks/quad.html it shows
that feeding from the side gives vertical and bottom gives horizontal
polarization. I am going to build a quad for the same reason.

 

Dave.

 

-----Original Message-----
From: aprssig-bounces at lists.tapr.org [mailto:aprssig-bounces at lists.tapr.org]
On Behalf Of Andrew Rich
Sent: Friday, January 12, 2007 4:10 PM
To: ozaprs; aprssig at lists.tapr.org
Subject: [aprssig] 145 MHz QUAD dimensions

 

Building a quad for ANDE and RAFT.

 

Any good designs floating around amoungst members ?

 

I am a little confused, this web site shows feed the loop at the top gives
you vertical polarisation ? This does not sound correct ?

 

http://www.southgatearc.org/techtips/quad.htm

 

PS - PCSAT data stream server at :-

 

http://vk4tec.no-ip.org/sat_panel.htm

-----------------------------------------
Andrew Rich
Amateur radio callsign VK4TEC
email:  <mailto:vk4tec at tech-software.net> vk4tec at tech-software.net
web: http://www.tech-software.net
Brisbane AUSTRALIA 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20070112/fea7e817/attachment.html>