[aprssig] RE: New EU Paradigm also Uiview32 and New-N for the USA
Ron Stordahl
ron.stordahl at digikey.com
Thu Sep 21 14:33:52 EDT 2006
John
That's a good point (although how that effects duplicate checking I do
not understand). But I do see that WIDE7-1 etc would be used up and
thus need not be in the list. Thus this should be revised to:
ALIAS=N5IN-4,WIDE4-4,WIDE4-3,WIDE4-2,WIDE5-5,WIDE5-4,WIDE5-3,WIDE5-2,WIDE6-6,WIDE6-5,WIDE6-4,WIDE6-3,WIDE6-2,WIDE7-7,WIDE7-6,WIDE7-5,WIDE7-4,WIDE7-3,WIDE7-2
Ill update my uiview32.ini file accordingly.
Beyond that change doesn't anyone else see anything out of compliance
with New-N?
It still does irk me that WIDE1-1,WIDE3-3 gets 4 digipeats on an N=3
limited digipeater. Seems to me that the recommendation should be to
configure the digipeater for N=2 and then recommend WIDE1-1,WIDE2-2 to
get 3 digipeats if you need it.
Ron, N5IN
John Habbinga wrote:
> You do not need to include WIDE7-1,WIDE6-1,WIDE5-1, or WIDE4-1. These
> will decrement once and terminate. Including them only serves to
> further inhibit duplicate checking amongst other digipeaters in the
> area.
>
> On 9/21/06, Ron Stordahl <ron.stordahl at digikey.com> wrote:
> ALIAS=N5IN-4,WIDE4-4,WIDE4-3,WIDE4-2,WIDE4-1,WIDE5-5,WIDE5-4,WIDE5-3,WIDE5-2,WIDE5-1,WIDE6-6,WIDE6-5,WIDE6-4,WIDE6-3,WIDE6-2,WIDE6-1,WIDE7-7,WIDE7-6,WIDE7-5,WIDE7-4,WIDE7-3,WIDE7-2,WIDE7-1
>
More information about the aprssig
mailing list