[aprssig] TEMPn-N and callsign digipeating

Robert Bruninga bruninga at usna.edu
Tue May 30 09:21:08 EDT 2006


Yes, MYAPRSCALL is not needed in the UIDIGI ALIAS list,
since all TNC's should digipeat on their own call (and alias).
Bob

>>> wa7nwp at jnos.org 05/29/06 3:31 PM >>>
> Yes,  Here is the overall suggestion  for D700's:
> 1) Using a PC, Permanently set UITRACE to TEMP to support TEMPn-N
> 2) Using a PC, set DIGI ON  <== if it defaults to off, I forget)
> 3) USING APRS MENU, set UIDIGI to WIDE1-1

set UIDIGI to WIDE1-1,MYAPRSCALL

Then anybody can use the portable digi by call and not only the WIDE1-1
flood.  Hmmm.  I wonder if that will be automatic if the "DIGI ON" is set.
 Also the DIGI would have to be the same callsign.  More and more
questions...

Hmm - another question.  I wonder if TXD will work if we're using the TNC
configured DIGI ON mode?

I just confirmed that it is required to add your APRSCALL to the UIDIGI
field.  It doesn't automatically digi on it.


_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org 
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig





More information about the aprssig mailing list