Fw: [aprssig] Re: I'm gonna drill....Right tool for the job..

[k7krj]

I'm planning a drilling / punching project myself.

Q. What hole size tolerance is acceptable for an NMO mount, is 3/4 the only
allowable size?

K7KRJ

> > >
> > > It also helps to have a specialized "Motorola antenna cutter"
instead
> of
> > > a generic 3/4" hole saw.
>
>   With a GreenLee hole punch, all you have to do is to drill a small
pilot
> hole, then the punch does the rest (you tighten it up and it makes the
> hole). Hole Saws can get away from you sometimes then you have a
bigger
> mess. Only drawback about the hole punch is that sometimes you need to
> people on a large roof (such as my suburban).
>
>   Just food for thought...
>
> --
> ...DOUG
> KD4MOJ
>
>
>
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig

This transmission may contain information that is privileged, confidential 
and/or exempt from disclosure under applicable law. If you are not the 
intended recipient, you are hereby notified that any disclosure, copying, 
distribution, or use of the information contained herein (including any 
reliance thereon) is STRICTLY PROHIBITED. If you received this transmission 
in error, please immediately contact the sender and destroy the material in 
its entirety, whether in electronic or hard copy format. Thank you.

5/5/2006 From: Kevin James To:k7krj1 at gmail.com