[aprssig] Cisco rollover to RS-232
Fred Atkinson
fred at WB4AEJ.COM
Sat Mar 4 06:19:33 EST 2006
I think this will do it. I'll give it a try as soon as my RJ45/DB25 connector I ordered from Jameco gets here.
73 and thanks,
Fred, WB4AEJ
--- redderek at comcast.net wrote:
From: Derek Koonce <redderek at comcast.net>
To: TAPR APRS Mailing List <aprssig at lists.tapr.org>
Subject: Re: [aprssig] Cisco rollover to RS-232
Date: Fri, 03 Mar 2006 17:50:16 -0800
I did a quick search using the terms [ "serial port" RJ45 "pin out" ] on
Google. Try this for a description:
http://www.arcelect.com/rs232.htm
Drawback is that it may not be a standard. I went back to search a bit
more using ["serial port" RJ45 "pin out" cisco] and found this
http://www.cisco.com/en/US/products/hw/video/ps1870/products_administration_guide_chapter09186a008007d503.html
and
http://www.technick.net/public/code/cp_dpage.php?aiocp_dp=pincabser_cisco_9
These show different pinouts than the previous link. I would keep
searching til you have a better feeling of the results. Final task would
probably be pick one pinout and test until you find a match. You can
also watch pins from the RJ45 unit and watch for data being transmitted
using an AC volt meter. Be sure to identify the ground pin before
starting. This could give you a starting point.
Derek Koonce
KE6JTP
Fred Atkinson, WB4AEJ wrote:
> I am getting an RJ45 to DB-25 adapter. I have to set the pins to the
>correct pinout myself.
>
> What I want is a way to turn the pins on the rollover cable into a DB-25
>RS-232 so I can talk to the TNC-2.
>
> Does anyone know the correct pinout for that?
>
> 73,
>
>
>
> Fred,
>WB4AEJ
>
>
>_______________________________________________
>aprssig mailing list
>aprssig at lists.tapr.org
>https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>
>
>
_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
More information about the aprssig
mailing list