[aprssig] New User Question(s)

[Mike Heskett]

At 09:53 AM 6/5/2006, you wrote:
>Just to clarify, any digi that can support WIDEn-N automatically
>also supports W1-1.   That was part of the beauty of the
>WIDE1-1,WIDE2-1 recommended path under the New-N.
>
>It works everywhere that WIDEn-N always works, but adds
>the ability to use fill-in-WIDE1-1-only digipeaters.  The only
>digis that cannot support WIDE1-1 are the old one-hop-only
>fill-in diigs that used to only support RELAY as the alias.
>
>Yes, those are supposed to change to support only WIDE1-1
>from now on.  Looking at KE4CJA-4 on FINDU indicates
>that it is already a WIDEn-N digi, although it is clear that
>it has not taken advantage of all the other advantages of
>the New-N Paradigm settings.
>
>Hope that helps
>Bob, WB4APR

They may support it, but if it is a KPC 3 with 8.2, it will not 
support it correctly(unless you put WIDE1-1 in the UID field). It 
will digi the WIDE1-1 and decrement it to WIDE1, which no one else 
will digi, effectively cutting you off from being digi'd again.
==/===/===/===/===/===/===/===/===/===/===/===/===/===/===/===/===/
Mike Heskett    email   mheskett at mindspring.com
WB5QLD  WWW 
<http://mheskett.home.mindspring.com/>http://mheskett.home.mindspring.com/
Hurst, TX
O-

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20060605/8665467a/attachment.html>