[aprssig] KPC 3+ and Peet Bros 100 interfacing

[Chuck Kimball]

It's set for packet mode (1 packet every 5 minutes with the $ULTW 
string, and it runs 2400 baud which I've set the KPC3+ to). 

$ULTW0000000002610000----000086A00001----009C01A400000000

I've tried both the standard Serial input and the GPS input (via pin 2 
radio port) on the KPC3+.

Thanks
Chuck



John Place wrote:

> Have you set the Ultimeter to constant data flow and 4800 baud?
>
>
>
> Chuck Kimball wrote:
>
>> Anyone have any suggestions or have one of those  Ah-Ha moments they 
>> care to share.
>>
>> I've been trying to get an Ultimeter 100 station I got earlier this 
>> week interfaced to a KPC3+ for a digi site, and seem to be chasing my 
>> tail.
>>
>> I've tried both the serial input, and the GPS input on the DB9.   I 
>> can see the data from the Ultimeter on my PC.   I can get data from 
>> my GPS into the KPC 3+. But I can't get the WX data to show up in the 
>> LT.   Anyone fought this battle before me?
>> Thanks in Advance
>>
>> Chuck   n0nhj
>> Glenwood Springs, CO
>>
>>
>> My test file:
>> INT TERM
>> HID OFF
>> CD SOFTWARE
>> MYCALL ATEST   RTEXT 12345678
>> UNPROTO APN391 VIA WIDE2-1
>> ABAUD 2400
>> GPSHEAD 1 $ULTW
>> LT 2 !3920.07NS10757.44W#PHG2800 W2,COn /A=008926 N0NHJ
>> LT 3 !3920.07NS10757.44W#PHG2800 W2,COn /A=008926 N0NHJ
>> BLT 1 EVERY 00:10:00 START 00:00:47
>> BLT 2 EVERY 00:20:00 START 00:00:07
>> BLT 3 EVERY 00:20:00 START 00:10:07
>> LTP 1 APN391 VIA WIDE2-1
>> LTP 2 APN391
>> LTP 3 APN391 VIA WIDE2-1
>> ;
>> UIDIGI ON WIDE3-3,WIDE4-4,WIDE5-5,WIDE7-7
>> UIDUPE 28
>> UIFLOOD  CO,28,ID
>> UITRACE WIDE,28
>> ;
>> RANGE 0.0:27.6/0.0:27.6/0.0:27.6/0.0:27.6/0.0:27.7
>> TELEMTRY 90
>> ;
>> ; DAYTIME  yymmddhhmmss
>> ;
>> MYREMOTE ATEST-9
>> ; INT GPS
>>
>>
>> _______________________________________________
>> aprssig mailing list
>> aprssig at lists.tapr.org
>> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>>
>>
>
>