[aprssig] KPC3+ and weather station

[Brian L. Short]

If using a Peet Bros Ultimeter 800 and the 2nd serial port on the KPC3+ (pin 2 and 6 of the RADIO port--db9) you must also connect a 10k resistor between the serial data out and ground lines from the 800. 
   
  If using the primary serial port (the db25) this is not required.
   
  As far as I know, Peet Bros are the only ones that support direct to TNC connection.
   
  73
  de kc0bs
   

		
---------------------------------
Bring words and photos together (easily) with
 PhotoMail  - it's free and works with Yahoo! Mail.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20060130/8fd90c79/attachment.html>