[aprssig] 1278 A, B, or C?

[Fred Atkinson, WB4AEJ]

    Well, I figured that.  Would it be safe to assume that it is an A as the
first model might not have the revision on it?

    73,



Fred, WB4AEJ

----- Original Message -----
From: "Tim Cunningham" <tim_cunningham at mindspring.com>
To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org>
Sent: Wednesday, January 25, 2006 9:57 AM
Subject: Re: [aprssig] 1278 A, B, or C?


> This only tells you what firmware is in the unit. The model should be
> printed on the front panel or on a label on the bottom of the unit.
>
>
> 73's,
> Tim - N8DEU
> Huntsville, AL
>
>
> ----- Original Message -----
> From: "Fred Atkinson, WB4AEJ" <fred at wb4aej.com>
> To: "APRS" <aprssig at lists.tapr.org>
> Sent: Wednesday, January 25, 2006 6:37 AM
> Subject: [aprssig] 1278 A, B, or C?
>
>
> >    I am negotiating with a fellow that has an MFJ-1278.  I asked him if
it
> > was the A, B, or C model.  He said:
> >
> >    tnc responds -AX.25 Level 2 Version 2.0 + BLP 1.0 Release 3.5
> > 07/03/92 -
> > 32K RAM Multilevel
> >
> >    How much does this tell you?
> >
> >    73,
> >
> >
> >                                                                    Fred,
> > WB4AEJ
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig