[aprssig] slightly OT:recessed male twist and lock

Ron McCoy rmccoylist at blueantservices.com
Sun Feb 5 10:15:13 EST 2006


My 10KW generator also has a 3-pin plug.

What would be the proper way to wire this into a static switch powering both
240v and 120v circuits?



-----Original Message-----
From: aprssig-bounces at lists.tapr.org [mailto:aprssig-bounces at lists.tapr.org]
On Behalf Of Ken Brown
Sent: Sunday, February 05, 2006 9:51 AM
To: 'TAPR APRS Mailing List'
Subject: RE: [aprssig] slightly OT:recessed male twist and lock



-----Original Message-----
From: aprssig-bounces at lists.tapr.org [mailto:aprssig-bounces at lists.tapr.org]
On Behalf Of Dale Blanchard
Sent: February 04, 2006 20:38
To: TAPR APRS Mailing List
Subject: Re: [aprssig] slightly OT:recessed male twist and lock

Generators are required to have 4 pin grounding plug. Partly for 
construction sites.

My Honda 3.5 kW generator that I use to power the 10 most critical circuits
(radio room, well pump, house heater, refrig, key lights, etc.) in the house
during power outages has a 3-pin twist lock.  It has a stud or somesuch for
attaching a separate ground wire, to be bonded to building ground or a
ground rod in outdoor applications) as you correctly indicate is required
under the codes.

73, ---Ken W2KB


_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig



_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig

-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.15.2/251 - Release Date: 2/4/2006
 

-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.15.2/251 - Release Date: 2/4/2006
 





More information about the aprssig mailing list