[aprssig] KPC3+

[Matt Werner]

The computer doesn't provide 12V however, and whatever voltages are
provided by the serial port are likely to be extremely low current.

On 2/4/06, Jim <kg6ows at clearwire.net> wrote:
> easy test. unplug walwart & see if tnc is powered with computer
> ----- Original Message -----
> From: "Matt Werner" <kb0kqa at gmail.com>
> To: "TAPR APRS Mailing List" <aprssig at lists.tapr.org>
> Sent: Saturday, February 04, 2006 9:50 AM
> Subject: Re: [aprssig] KPC3+
>
>
> > http://www.kantronics.com/documents/kpc3ppinout.pdf
> >
> > Page 2, pin 13.
> >
> > EXT-IN can be jumpered to supply power to the TNC.  Power can go both
> > ways however, so shorting this pin, if jumpered correctly, will short
> > the walwart (if that's what you're using).
> >
> > See J7 on the top of that page.
> >
> > 73 - Matt
> > KB0KQA
> >
> > On 2/4/06, K2DLB <k2dlb at stny.rr.com> wrote:
> >> Matt
> >>     I don't find anything in the jumper listings for +12v output to
> >> computer
> >>
> >> Brian
> >> _______________________________________________
> >> aprssig mailing list
> >> aprssig at lists.tapr.org
> >> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> >>
> >>
> >>
> >
> > _______________________________________________
> > aprssig mailing list
> > aprssig at lists.tapr.org
> > https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> >
> >
> >
> > --
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.1.375 / Virus Database: 267.15.1/250 - Release Date: 2/3/2006
> >
> >
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>