[aprssig] aprsd confusion

[Gerhard F5VAG]

You are gating corrupted Mic-E to the APRS-IS:
http://france.aprs2.net:8080/php/bad_mice_find.php?call=VK4TEC

--
73 de Gerhard, F5VAG / DL7MW


> -----Original Message-----
> From: aprssig-bounces at lists.tapr.org
> [mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Andrew Rich
> Sent: Saturday, April 22, 2006 6:31 PM
> To: TAPR APRS Mailing List
> Subject: RE: [aprssig] aprsd confusion
> 
> 
> Thanks
> 
> Yes I went this way and it works well
> 
> -----------------------------------------
> Andrew Rich
> Amateur radio callsign VK4TEC
> email: vk4tec at tech-software.net <mailto:vk4tec at tech-software.net>
> web: http://www.tech-software.net
> Brisbane AUSTRALIA
> 
> 
> 
> -----Original Message-----
> From: VE7GDH [mailto:ve7gdh at rac.ca]
> Sent: Saturday, 22 April 2006 10:50 PM
> To: aprssig at lists.tapr.org
> Subject: Re: [aprssig] aprsd confusion
> 
> 
> Andrew VK4TEC wrote...
> 
> > I am trying to use aprsd as an RF to INET only system
> > It is working well. The only thing is, it seems to let in "ALL"
> > the traffic from the INET server.
> > How can I configure aprsd to just let me "send" to the net and not have to
> > "listen" to all the inet trafffic hitting my linux box ?
> 
> You could connect to a regional feed or to a "port 14580" server that allows
> you to specify a filter.
> 
> >From the sample you provided...
> 
>    #Server connection definitions
>    #
>    #usage: <Server> <host name> < host port> <TYPE-DIR>
>     <optional OmniPort filter command>
> 
> etc.
> 
>    Server second.aprs.net 23 hub-sr
>    Server first.aprs.net 23 hub-sr
>    Server third.aprs.net 23 hub-sr
> 
> With the above, you would connect to one of the three specified servers.
> 
> See http://www.aprs-is.net/APRSServers.htm
> It looks like port 23 is a "full feed" of the world.
> 
> See http://second.aprs.net.au:14501/
> It looks like port 14576 would be "your position + 500 km"
> Port 14580 is a "user definable filter port"
> 
> >From the "usage" example you sent, it looks like you should enter something
> like...
> 
> Server second.aprs.net.au 14676 hub-sr
> 
> or
> 
> Server second.aprs.net.au 14580 hub-sr m/1000
> 
> but I'm guessing at the syntax for the filter... e.g. "m/1000" for a "my
> range filter of within 1000 km of your position"
> 
> Looking at http://second.aprs.net:14501/ it looks like you are currently
> connected, both wih UI-View and with aprsd.
> 
> 14580 218.215.66.12:2222 VK4TEC Yes UI-View32 V2.03
>    p/PCSAT/PC2/W3AD/RS0/ISS d/RS0ISS-3/PCSAT2/W3ADO-1
> 
> And the line immediately below there shows...
> 
> 14580 218.215.66.12:1857 VK4TEC-10 Yes aprsd 2.1.5b9
> 
> so VK4TEC-10 is connected to port 14580 with aprsd but with no filter
> entered. As far as I know, you could send to the server, but with no filter
> defined, it wouldn't send anything back to you. Maybe that is what you were
> intending to do.
> 
> 73 es cul - Keith VE7GDH
> --
> "I may be lost, but I know exactly where I am!"
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
> 
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig